Mark Rehorst's Tech Topics

My technical projects that include topics such as 3D printing and printer design, photography, optics, electronics, etc.

Saturday, October 17, 2020

A Few Tips For Using Wi-Fi Enabled Light Bulbs

›
I've been making some lamps using cheap, Wi-Fi enabled light bulbs for a while and I've learned the hard way that there are a few th...
Thursday, October 15, 2020

Coasters, anyone?

›
I Needed Some Coasters, So... The coasters are orange, the bottom of the box is yellow, and the top is pink, all at least a little fluoresce...
Friday, July 24, 2020

The Effect of Drawing Speed on a Sand Table Pattern

›
Most people run their sand tables at 100 mm/sec or less which helps keep noise down and detail in the drawing high, though it can be a littl...
1 comment:
Friday, July 17, 2020

A Car Stand for a OneWheel Pint

›
My son rides around on something called a OneWheel . It's like an electric skateboard but it has only one large tire and it sort of self...
Wednesday, July 8, 2020

To a Hammer, Everything Looks Like a Nail

›
A couple years ago I installed a timer switch on my front porch light so it would turn on at dusk and off at dawn. It was one of those smart...
4 comments:
Wednesday, July 1, 2020

YAFL: Yet Another Fractal Lamp

›
My brother, the distiller, built a bar in his living room, and I thought that he might like a bar-worthy lamp for it, so I got busy. I recen...
2 comments:
Tuesday, June 2, 2020

The Spice Must Flow Gets Servomotors

›
This is an update to my often-updated sand table project, The Spice Must Flow .   Different types of motors for different uses Stepper motor...
12 comments:
‹
›
Home
View web version
Powered by Blogger.